<acronym id="0msww"><small id="0msww"></small></acronym><acronym id="0msww"><center id="0msww"></center></acronym>
<rt id="0msww"><optgroup id="0msww"></optgroup></rt>
<acronym id="0msww"><small id="0msww"></small></acronym>
Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 最新索引

550 kV GIS用三工位隔離開關開合母線轉換電流研究

來源:電工電氣發布時間:2019-06-13 14:13 瀏覽次數:39
550 kV GIS用三工位隔離開關開合母線轉換電流研究
 
朱傳運,黃坤鵬,薛紅濤,黃鑫,李偉強
(河南平高電氣股份有限公司,河南 平頂山 467001)
 
    摘 要:開發了550 kV GIS用三工位隔離開關,通過對開斷過程中絕緣配合設計,預判放電通道,保證電弧僅在抗燒蝕能力強的動、靜弧觸頭之間燃燒。型式試驗后樣機的燒蝕工況分析表明,通過提高隔離開關分合閘速度,避免了開合過程中出現的電弧漂移現象,通過對電弧燃燒時間長短及分散性統計,合理解釋了分、合閘速度對電弧漂移的影響,驗證了所設計的三工位隔離開關的合理性。
    關鍵詞:隔離開關;母線轉換電流;絕緣設計
    中圖分類號:TM564.1     文獻標識碼:A     文章編號:1007-3175(2019)06-0021-03
 
Research on Bus-Transfer Current of Three-Working-Position Disconnector Equiped in 550 kV GIS
 
ZHU Chuan-yun, HUANG Kun-peng, XUE Hong-tao, HUANG Xin, LI Wei-qiang
(Henan Pinggao Electric Co., Ltd, Pingdingshan 467001, China)
 
    Abstract: The three-working-position disconnector equipped in 550 kV GIS was developed. The discharge path could be predicated by the insulation coordination design in the breaking course, to ensure that the arc only burnt between the moving and fixed contact with high erosion resistance ability. The ablation working condition of prototype after type test shows that the arc shift phenomenon could be avoided in the breaking and making course by improving the speed of disconnector’s breaking and making, and the impacts of its speed on the arc shift was explained reasonably by the statistics of arcing time length and its dispersibility, which verifies the rationality of the designed three-working-position disconnector.
    Key words: disconnector; bus-transfer current; insulation design
 
參考文獻
[1] 賈志杰,甘德剛,李晶.±500 kV氣體絕緣金屬封閉輸電線路絕緣尺寸設計[J]. 電網技術,2011,35(8):192-196.
[2] 施衛華, 阮寧暉, 王進. 高壓開關電器的發展及應用[J]. 昆明冶金高等??茖W校學報,2005,21(5):45-51.
[3] 范廣偉,樊楚夫,黃實,等. 氣體絕緣隔離開關開合母線轉換電流試驗的分析[J]. 高壓電器,2017,53(4):215-219.
[4] 裴峰,蔡藝云. 隔離開關開合母線電流轉換能力分析[J]. 機電工程技術,2015,44(9):134-137.
[5] 李廣山. GIS中隔離開關開合母線轉換電流能力的分析[J]. 高壓電器,2002,38(1):57-59.

 

博京娱乐-博京娱乐-官方网站